'Blunderbuss' Blog

Metallic Silhouette Shooting, Reloading Bench, Ammunition, Firearms Maintenance & Marksmanship Techniques

Yearly Archives: 2012

National Shoot May 2012

National Results May

I hadn’t expected to be attending our National Classification shoot yesterday but due to my newest little niece or nephew taking its time to come into this world I had time to attend the event.

Weather was a little nippy on the trigger finger but as the morning got going I got of to a great start in SBSR knocking over 9 chickens and 10 pigs but as a little anxiety crept in I could only manage to send 6 turkeys scuttling from their feet leaving me with a tally of 25 / 30.

Due to the small numbers in attendance I shot both my events back to back. With a shaky start I popped off my first shot to the right of Mr chicken number 1. With a little position adjustment all 9 remaining chickens responded to my shots as they took flight. In addition 9 pigs fell as I felt a shooting confidence in my position and execution of each shot. As I continued to build a result that I could be happy with turkey talk was awaiting my reply. All in all 8 turkeys spun front their feet to give me a comfortable tally of 26 / 30.

With an end to the days shooting I am now looking forward to June 17th all going well to see if I can top my scores of the day.

Permanent link to this post (235 words, estimated 56 secs reading time)

Centre X My New .22lr Ammo

Centre X Out To Impress

Earlier this year I had my .22lr Anschütz 1710 batch tested for Lapua’s Centre X as an alternative to shooting with Eley Match & Tenex due to costs and availability.

Today was my first chance to shoot out to 100 yards from a bench rest and after a few sighter shots and adjustments to windage and elevation I began to drop in a few tidy cloverleaf 3 & 5 shot groups. Although not all groups were tight masterpieces, this is something I will mark down as my lack of experience in the discipline of rimfire benchrest skills. I know my little ‘Annie’ is much more accurate than I am.

Now that I have witnessed how the new Centre X performs on paper at 100 yards I will be excited to get back to knocking down a few Rams once our range is fully functional ‘but that may not be for a few months yet’.

20120516-190448.jpg

Permanent link to this post (161 words, 1 image, estimated 39 secs reading time)

Flipping Primers Using A Lee Safety Primer Feed

Primed & Ready

There are a number of makes and models of priming tools on the market for both manual and automated priming of a case.  I prefer to use a priming tool than to manually handle the primer.

At all costs I try to avoid touching the live primers with my hands mostly for safety reasons as these little babies could cause you severe damage if one were to explode.

As I use the Lee Safety Primer Feed that attaches to my Lee Press I thought I would put this little video together to demonstrate how you can flip the primers over to have them presented the correct way up before seating them into your cases.

Permanent link to this post (119 words, estimated 29 secs reading time)

Lapua .22lr Electronic Batch Testing

Lapua .22lr Electronic Batch Testing At Dungannon Rifle Club

On March 24th at Dungannon Rifle Club, I had my Anschutz 1710 tested by one of the ammunition testing staff from the German Lapua factory. Andre from Lapua had around 17 batches of Lapua Centre X available to see if he could pin point a specific batch that suited my barrel. With a 50 Metre protected tunnel in place, ‘constructed from timber and plastic sheeting’ the results of each shot would be as accurate as they could be with no interference from the wind. Firstly my rifle with stock attached was clamped into a heavy duty vice and the rifle details were entered into the Meyton Electronic GmbH software program that also measured the bullet groups as they were shot and tested. Each 10 shot group was recorded and with a visual diagram and accurate reading it was easy to distinguish which batch of ammunition gave the better group. With the synthetic stock attached and clamped it looked like results were somewhat inconclusive ‘although one batch did show signs of grouping well’ as the stock continued to vibrate in the vice. Due to the stock being synthetic it could not be clamped to its tightest tolerance or it would either crack or become squeezed too tight against the barrel and that would affect the free floating setup of the barrel and stock.

This is a preview of Lapua .22lr Electronic Batch Testing. Read the full post (422 words, 2 images, estimated 1:41 mins reading time)

New Season, New Brass

New Season New Brass

With a new shooting season beginning I decided to spend a couple of hours during the weekend preparing some once fired brass for my 6.5×55.

The first step in my brass preparation was to anneal all the case necks. A demonstration on how this was done can be found here. Once annealed and dried off I Neck Sized and Deprimed the cases before dropping them into my case tumbler for a few hours to brighten them up. Three hours later and a few mugs of tea drunk my cases were clean and ready for their next step. The final six stages of case preparation involved cleaning the primer pocket, deburring the flash hole, squaring of the primer pocket, ensuring the case length was not exceeding the recommended published limit and finally chamfering and deburring the case mouth for bullet seating. I now have an additional 35 Lapua 6.5×55 ‘Once Fired Cases’ ready for reloading.

This is a preview of New Season, New Brass. Read the full post (204 words, 5 images, estimated 49 secs reading time)